Devices
Last updated
Was this helpful?
Maitre'D POS
Last updated
Was this helpful?
Remove an obsolete device.
Modify the properties of an existing device.
Bar Dispenser #1
Type
Enable the type of the bar dispenser.
Port
Enable the serial port of the bar dispenser. This choice is enabled only when the selected type above is serial.
NOTE: The bar dispenser cannot share this serial port with another device.
Section
Enter the section of the bar dispenser.
Bar Dispenser #2
Maitre'D supports 2 Berg bar dispenser devices on the same workstation.
Type
Enable the type of the second bar dispenser.
Port
Enable the serial port of the second bar dispenser. This choice is enabled only when the selected type above is serial.
NOTE: The bar dispenser cannot share this serial port with another device.
Section
Enter the same section as the bar dispenser #1.
NOTE: The North American Protocol does not support separated sections. Maitre'D counts all poured liquids in the section of the first dispenser.
Biometric Reader
Type
Enable the type of the fingerprint biometric device.
Card Reader
Type
Enable the type of the card reader.
Port
Enable the serial port of the card reader. This choice is enabled only when the selected type above is serial.
NOTE: The card reader cannot share this serial port with another device.
Driver
Enable the driver of the card reader.
Cash Card Reader
Type
Enable the type of the cash card reader.
Port
Enable the serial port of the cash card reader. This choice is enabled only when the selected type above is serial.
NOTE: The cash card reader cannot share this serial port with another device.
Driver
Enable the driver of the cash card reader.
Cash Drawer #1 & #2
Type
Enable the type of this cash-drawer.
Port
Enable the serial port of this cash-drawer. This choice is enabled only when the selected type above is serial. This selection will be valid only if a serial printer is defined on the same serial port.
NOTE: A cash drawer cannot share this serial port with another device, except if it is connected to a serial printer.
Driver
Enable the driver of this cash-drawer.
Coin Dispenser
Type
Enable the type of the coin dispenser.
Port
Enable the serial port of the coin dispenser. This choice is enabled only when the selected type above is Serial.
NOTE: The coin dispenser cannot share this serial port with another device.
Driver
Enable the driver of the coin dispenser.
CVM
Type
Enable the type of the CVM monitor.
Port
Enable the serial port of the CVM monitor.
NOTE: The CVM monitor cannot share this serial port with another device.
Driver
Enable the driver of the CVM monitor.
Fiscal Printer
Type
Enable the type of the fiscal printer.
Port
Enable the serial port of the fiscal printer.
NOTE: A fiscal printer cannot share this serial port with another device, except if a cash drawer is connected to it.
Driver
Enable the driver of the fiscal printer.
Digital Video Recorder
IP Address
Enter the IP Address of the DVR.
NOTE: The same DVR can be defined in more then one workstation.
Camera Number
Enter the DVR camera number.
Driver
Enable the driver of the DVR.
Line Display
Type
Enable the type of the line display.
Port
Enable the serial port of the line display. This choice is enabled only when the selected type above is serial.
NOTE: The line display cannot share this serial port with another device.
Port Number
Enter the TCP/IP Port of the DVR.
Driver
Select the driver of the DVR.
Exclude Command Field
Enable this option Not to send the Command field in the text message sent to the DVR.
Exclude Camera Number
Enable this option Not to send the Camera number in the text message sent to the DVR.
Network Printer
IP Address
Enter the IP Address of the network printer.
NOTE: The same network printer can be defined in more than one workstation.
Port Number
Enable the port number of the network printer.
Printer Type
Enable the driver of the network printer.
PIN Pad
Type
Select the type of the PIN pad.
Port
Select the serial port of the PIN pad.
NOTE: The PIN pad cannot share this serial port with another device.
Driver
Select the driver of the PIN pad.
ID
Enter the identification number of the PIN pad.
NOTE: This information is provided by the payment processor or by the gateway provider.
Idle Message
Enter an idle message to be displayed on the PIN pad between transactions.
NOTE: This field is only available when the driver selected above is Verifone. Also, this only works for non-EMV protocols. With EMV protocols, the PIN Pad idle message is controlled by the third-party application driving the PIN Pad.
Identity
Type in the device name as required by the payment processor or gateway provider. This is sometimes referred to as "Secure Device ID".
Prompt for Tip
Enable this option for the pin pad device to quote the customer for a Tip entry.
Print tip line
Enable this option to print a tip and total line on transaction records for card payments.
Printer
Type
Enable the type of the printer.
NOTE: For a USB printer, map it to a COM port, and configure it as a Serial printer.
Port
Enable the port of the printer.
NOTE: A printer cannot share this port with another device, except if a cash drawer is connected to it.
Driver
Enable the driver of the printer.
Scale
Type
Enable the type of the scale.
Port
Enable the serial port of the scale. This choice is enabled only when the selected type above is serial.
NOTE: The scale cannot share this serial port with another device.
Driver
Enable the driver of the scale.
Scanner
Type
Enable the type of the scanner.
Port
Enable the serial port of the scanner. This choice is enabled only when the selected type above is serial.
NOTE: The scanner cannot share this serial port with another device.
Driver
Enable the driver of the scann
